Wave-To-Open Sensor with Manual Override Button - French

The ENFORCER contactless aperture request detector uses infrared technology to allow the user to exit a protected place by an access control system simply with a hand gesture. As the function is contactless, this detector is ideal for hospitals, medical centers, laboratories, clean rooms, schools, factories, and offices. Added a manual cancel button for the SD-927PKC-NFVQ.

  • product_icon
  • product_icon
  • Detection range up to 23/8″-8″ (6~20 cm)
  • Single stainless steel plate
  • 3A relay, adjustable by 0.5~30 seconds, rocker or as long as the hand is near the sensor
  • Screwless terminal block with fast connection
  • LED ring illuminated detector for easy identification.
  • Selectable two-tone LED ring (from red to green, or from green to red) to indicate that the detector has been triggered.
  • Adding a manual cancel button as an auxiliary device for the sensoror
Operating Voltage 12~24 VAC/VDC
Current Draw 120mA@12VDC
Relay Type Form C dry contact, 3A@24VDC
Override Button – Switching capacity 3A@24VDC
Override Button – Mechanical life 500,000 cycles
Response Time 10ms
LEDs – Standby Red*
LEDs – Triggered Green*
Output Time Adjustable, 0.5~30 sec., toggle, or as long as sensor is triggered
Range Adjustable, 2-3/8″~8″ (6-20 cm)
Operating Temperature -4°~131° F (-20°~55° C)
Weight 3.9-oz (110g)

Product Information Sheet (PI)



Scroll to Top
This site is registered on as a development site.