Showing 1–12 of 21 results
1-Room Indicator with Buzzer
DIYModel Number: RM-R100-RB1Q
The ENFORCER Room Monitor can be used to monitor the occupancy status of rooms in high traffic areas: restrooms, fitting rooms, etc. The Room Monitor uses PIR and phototransistor sensors to monitor the occupancy of a room. The 1-Room Indicator includes additional features, such as a built-in buzzer and service button input, for applications where occupants may need assistance.
Additional 1-Room Indicator
Programmable to flash after a present time (3, 5, 10, 15, 20, 30 minutes)
Indicator will flash and beep if Help Button is pressed
Multiple decals included
Micro USB or terminal block (5~12VDC)1-Room Occupancy Monitor Kit
DIYModel Number: RM-R100-KB1Q
The ENFORCER Room Monitor can be used to monitor the occupancy status of rooms in high traffic areas: restrooms, fitting rooms, etc. The Room Monitor uses PIR and phototransistor sensors to monitor the occupancy of a room. The 1-Room Indicator includes additional features, such as a built-in buzzer and service button input, for applications where occupants may need assistance.
Programmable to use PIR (movement), phototransistor (light), or door sensor input (switch) to detect occupancy
1-Room indicator has a programmable, built-in buzzer for service input
Programmable reminder, 3~30 min
Simple to install u2013 micro USB or terminal block (5~12VDC)
Suitable to use in restrooms, fitting rooms, etc. to monitor occupancy
Each sensor can transmit to unlimited number of indicators
Kit includes Sensor, 1-Room Indicator, micro USB cables and decals2-Room Indicator
DIYModel Number: RM-R100-R2Q
The ENFORCER Room Monitor can be used to monitor the occupancy status of rooms in high traffic areas: restrooms, fitting rooms, etc. The Room Monitor uses PIR and phototransistor sensors to monitor the occupancy of a room. The 2-Room Indicator is ideal for monitoring multiple rooms at once.
Additional 2-Room Indicator
Monitor two rooms (requires additional Room Occupancy Monitor)
Programmable to flash after a present time (3, 5, 10, 15, 20, 30 minutes)
Multiple decals included
Micro USB or terminal block (5~12VDC)Auto Voice Reminder
DIYModel Number: AS-1511
Plays a custom user-recorded message when sensor is activated.
u200bu200bEasily record personal reminders, warnings, or other messages
Play a welcome message to customers in commercial establishments
Record custom message up to 15 seconds
u00a0Adjustable volume (Low, High, Off)
Wall-mountable
Sensor detection angle and range of 100u00ba@30ft (9m)
Easy installation, no hardwiring necessary
Battery operated (3 AAA batteries, not included)
Battery life up to 2 months (10 triggers/day)
For indoor motion alerts only – not designed to be a security deviceDummy Dual Photoelectric Beam Sensor with Flashing Red LEDs
DIYModel Number: BD-T100Q
Strong ABS plastic construction
Wall- or pole-mountable
Battery-powered flashing red LED (requires 2 AA batteries – not included)u200b
Dummy IR Box Camera (non-working IR)
DIYModel Number: VD-10BNA
Simulation (fake) of real box camera incorporates a realistic appearance with video/power cable to give it an authentic look
Battery-powered LED (single flashing LED)
Requires 2 AAA batteries (not included)
Constructed of strong ABS plasticImportant: SECO-LARM makes no warranties expressed or implied that dummy cameras will prevent any criminal or inappropriate activity.u00a0 SECO-LARM u00a0disclaims any and all liability for any damages to property or persons as a consequence of the purchase or installation of dummy cameras. Neitheru00a0 SECO-LARM u00a0nor any of its officers, employees or resellers shall be subject to any liability arising out of the sale of this product. The purchaser assumes all risk and all liability arising out of the installation of dummy cameras.
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws.u00a0 SECO-LARM u00a0is not responsible for the use of this product in violation of any current lawsu00a0 or statutes.Indicator Remote
DIYModel Number: RM-R100-TH2Q
Use to reset a 1-Room Indicator remotely, after it has been triggered by a Wall-Mount Help Button.
Powered by CR2032 battery (included)
LED Indicates transmission
Belt clip or wall mounted (Belt clip included)
Transmits up to 500ft (150m)Motion Entry Alert
DIYModel Number: AS-6111Q
Mount next to a door or other entry point to alert when someone enters or exits
Provides an audible alert (doorbell sound) when triggered
Sounds for approximately 4 seconds or for as long as the sensor detects changes in visible light
CDS sensor operates by detecting sudden changes inu00a0visible light*
Sensor range 10ft (3m)
Battery operated (3 AAA batteries, not included)
Designed for motion alerts only
Low current drain (0.05mA standby)u200b
*IMPORTANT:u00a0AS-6111Q is designed to detect changes in visible light. Not for use in total darkness or facing a strong light.Parking Alert
DIYModel Number: AS-7021
The CBAu00aeu00a0AS-7021 Parking Alert allows you to stop in the right spot every time. The sensor uses ultrasonic pulses to determine how far, or close, your vehicle is. Mount this sensor almost anywhere with the included double-sided foam tape, or included screws. Always know when youu2019ve stopped in the right place!
Ultrasonic sensor allows precise parking in a garage or parking spot
Adjustable sensing distance
Battery operated with low-battery indicator (batteries not included)
Wall mountable using either double-sided foam tape or screws
Simple traffic light colors indicate distanceGreen:u00a0Vehicle detected
Yellow:u00a0Warning
Red:u00a0StopPortable RF Wireless Vibrating Receiver
DIYModel Number: RA-4961-VPQ
Functions similar to that of the RA-4961Q (wireless receiver)
Connect up to 4 wireless transmitter accessories
Audible, visual, and physical alert via built-in speaker, LEDs and vibration
Belt clip and small size for easy portability
Each channel independently programmableu200b
RF Wireless Magnetic Contact
DIYModel Number: RA-4961-MCQ
For use with the RA-4961 series receivers
Wirelessly monitor windows, doors, or other areas
Up to 1,000ft (305m) transmission range*
Activates each time the door or window is moved
Magnet can be placed on either side
Adhesive mount u2013 no screws required*Line of sight. Transmission range will vary depending on installation and operating environment.
RF Wireless Mailbox/Tilt Sensor
DIYModel Number: RA-4961-MBQ
For use with the RA-4961 series RF receivers
Wirelessly monitor mailboxes or any tilting motion
Up to 1,000ft (305m) transmission range*
Mounts to standard mailbox flaps or other flat surfaces that may tilt
Adhesive mount u2013 no screws required
Adjustable sensing angle*Line of sight. Transmission range will vary depending on installation and operating environment.